![\"Voyager](\"https:\/\/www.roarontheshore.com\/wp-content\/uploads\/2023\/08\/Voyager-Trike-Kit-Problem-And-Solution-1024x574.webp\")
<\/figure>\n\n\n\nTroubleshooting And Fixing Voyager Trike Kit Problems<\/h2>\n\n\n\n
Using a trike kit is really safe and functional if it works properly. However, different riders have reported seeing a number of issues with Voyager Trike kits. Let’s see what these are and, more importantly, how to solve them.<\/p>\n\n\n\n
Traction problem<\/h3>\n\n\n\n
A very common problem with voyager trike kits is loose traction on the rear wheel. When it comes into contact with stone, gravel, or dips in the road, the performance drops extensively. <\/p>\n\n\n\n
In such cases, you may have to push your bike heavily to get an adequate amount of traction. And definitely, it’ll be frustrating.<\/p>\n\n\n\n
This problem mainly occurs with pre-loading issues. The setup of the Voyager trike kit on the bike is crucial and requires skills to accomplish. <\/p>\n\n\n\n
That’s why, while setting up, the pre-load must be adjusted as needed. Thus, the traction issues can be mitigated.<\/p>\n\n\n\n
However, if you don\u2019t know how to adjust the preload, don’t worry. We’re going to discuss it in detail later.<\/p>\n\n\n\n
The bike leans or pushes Right\/Left<\/h3>\n\n\n\n
Just like we’ve already discussed, the setup of the kit on your bike is really important. If it\u2019s not well fitted, and not in the exact center, the bike will be unstable, especially in the corner.<\/p>\n\n\n\n
While driving, you can easily feel if the bike leans or pushes to either side. The leaning of the bike can be solved by placing shims between the belly bracket and frame.<\/p>\n\n\n\n
On the other hand, pushing off the bike may occur when the Voyager kit is not aligned properly. You may need to loosen the bracket and re-align it perfectly.<\/p>\n\n\n\n
To reduce the extra cost of solving this, make sure the setup is done perfectly the first time. Always choose a skilled and experienced person for servicing. <\/p>\n\n\n\n
Making noise<\/h3>\n\n\n\n
Sometimes riders have noticed irritating noises coming from the Voyager trike kit. During a ride, especially on off-roads, the kit starts making noises. That’s nothing but a problem of loose fitting. <\/p>\n\n\n\n
To make sure that the problem is with the bolts, check all the nuts and bolts that are included with the kit. <\/p>\n\n\n\n
Make them tight and rigid. Furthermore, applying grease to the rear bearing and tightening jam nuts can be helpful.<\/p>\n\n\n\n
However, for new bearings, neither applying grease nor tightening jam nuts is necessary since the new bearing performs well and doesn’t have jam nuts either.<\/p>\n\n\n\n
\nRead Also:<\/strong> 5 Common Roadsmith Trike Problems And Ways To Fix Them<\/a><\/p>\n<\/blockquote>\n\n\n\n
Shake and vibration <\/h3>\n\n\n\n
The Voyager trike kit is not perfectly designed. So, sometimes riders have experienced shaking and vibration while driving. Moreover, the front end shock and spring can be worn, and the tire can be out of balance.<\/p>\n\n\n\n
Due to the problem with the shock absorber and imperfect tire pressure, this problem can be seen. <\/p>\n\n\n\n
The tire pressure of the Voyager trike kit should be 20 lbs., whereas the motorcycle tire pressure can be normal. <\/p>\n\n\n\n
The front tire should maintain 5-10 lbs., whereas the back tire should be at maximum air pressure. Thus, the problem can be mostly solved. <\/p>\n\n\n\n
This problem is very minor and can be fixed by proper calibration of air pressure and maintaining the tire and wheel. Thus, it may not cost you a lot of money.<\/p>\n\n\n\n
Pre-loading issue <\/h3>\n\n\n\n
This is the most common problem with the Voyager Trike Kit. The pre-loading issue can cause many other problems like imbalance, loss of traction, malfunction of the shock absorber, etc.<\/p>\n\n\n\n
Many users recommended increasing the preload by \u00be inches to get the best result. However, the company behind Voyager Kit has provided an official guide to setting up the preload. You can find it here<\/a> on their official website.<\/p>\n\n\n\n
The method includes loosening the \u00bd” U bolt on the suspension lock bar and rolling the bike tire on the \u00bc, \u00bd, or \u00be” preload plate. The bike should be in first gear while doing this. Now tighten the bolt again. <\/p>\n\n\n\n
However, remember that the more preload you fix, the less lean will be possible to do with the motorcycle. <\/p>\n\n\n\n
Wrong setup<\/h3>\n\n\n\n
On social media and online groups the most commonly arising problem you may see is the improper setup of the Voyager Trike Kit. <\/p>\n\n\n\n
What happens in most cases is, the kit is not aligned perfectly. As a result, the bike tends to move in either direction. <\/p>\n\n\n\n
In contrast, you can see a plethora of examples where people have ridden over 5000 miles with no issues just because the kit setup was perfect.<\/p>\n\n\n\n
So, how do you solve this issue? The only solution is to find an experienced mechanic. One who has previous experience setting Voyager kits. <\/p>\n\n\n\n
Also, make sure to discuss how those previous setups are currently working. Then, if you\u2019re convinced, you can go with him.<\/p>\n\n\n\n
Otherwise, with an improper setup, you can face issues like shock absorber failure, less traction of the wheel, etc. However, the cost of setup may depend on various parameters, and you shouldn\u2019t compromise on this.<\/p>\n\n\n\n
\n